NPACK

塑料果汁瓶蓋起重送料器封蓋器設備

 »  製品 »  灌裝機 »  塑料果汁瓶蓋起重送料器封蓋器設備

塑料果汁瓶蓋起重餵食器封蓋器設備

描述


Notification prior to starting the bottles capping machine model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary type

1:Before the machine is plugged in, make sure the power switch is in the closed state, and then follow the instruction.

2:If the machine does not run in a long time, it should be wiped with a piece of dry cloth and must not be cleaned with any corrosive cleaning agent.

3:It is strictly prohibited to spurt any liquid into the electric box of the machine, so as to avoid corrosion to the internal electrical components and cause short circuit.

4:Check according to the equipment packing list models, specifications and quantity of the equipment and materials to make sure that they meet the requirements of design and product standards and accompanied by certificates of conformity.

5: Check the appearance of the equipment to make sure that it is free from any deformation, damage and corrosion, and all spindles that they should be flexibly rotating without any blockage.

6: This machine is working under single phase AC 110V, and the flat 3-legged power plug should be plugged into the power socket with a ground wire.

Technical Parameters of model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary plastic juice bottle caps lifting feeder capper equipment:

plastic juice bottle caps lifting feeder capper equipment1

Model NPACK-AC50
Capping speed:15-30 pieces/min
Rated voltage:110V/60Hz(US Standard)
Machine Power:0.8KW
Ampere:2.2A
Exterior dimension:2230*1460*1600 MM(L*W*H)
Air Pressure: 0.7 MPa
Weight: About 300 KG

Capping machine in details:

plastic juice bottle caps lifting feeder capper equipment2

plastic juice bottle caps lifting feeder capper equipment2

plastic juice bottle caps lifting feeder capper equipment2

I.Structures of the machine:

plastic juice bottle caps lifting feeder capper equipment5

Ⅱ. Optical fiber electric eye description

1.electric Eye to detect bottles:

plastic juice bottle caps lifting feeder capper equipment6

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming
bottles.
When the incoming bottle is detected, the "turntable" rotates.

2. Lid-delivery electric eye

plastic juice bottle caps lifting feeder capper equipment7

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming covers.

When the incoming lid is detected, the "taking-out mechanism" rises for taking material.

3. Lid-delivery electric eye

►When it is operated in automatic mode: The purpose of this electric eye is to detect incoming bottles.

When the incoming bottle is detected, the "lock cap mechanism" rotates the lock cap downwards.

Ⅲ.Switch button and wiring port.

1.Touch screen and emergency stop

plastic juice bottle caps lifting feeder capper equipment9

2.Feed motor and lid vibration plate controller

Vibration plate controller

Vibration plate controller: By adjusting the voltage, adjust the discharging speed.

3.Power switch and sockets

4.Motor controller

Frequency transformer: By adjusting the frequency transformer button, adjust the motor speed.

Ⅵ.Maintenance on model NPACK-AC50 Bottles capping machine

plastic juice bottle caps lifting feeder capper equipment14

1,檢查和維護機器,使機器伸長,優化機器功能;

工作機器應每三個月維護一次;軸承和齒輪傳動部件必須用潤滑脂潤滑;潤滑必須定期進行;滑道油(N68)應該像往復機構一樣運動或每天提升兩次;汽車油(N68)應加入旋轉或擺動部件;每半個月將潤滑脂添加到凸輪槽中;每個月一次加油嘴加油嘴;

2切勿使用金屬工具敲擊或刮擦粘接在部件或模具等部件上的表面。

3.如果機器長時間停止運轉,在傳動裝置或軸承部件等部位加潤滑脂進行潤滑;還要對機器進行防水處理。

4切勿在機器上放置任何物體,以免損壞機器。

5.定期清潔組件內的灰塵,檢查所有螺釘,並擰緊鬆動的螺釘。

6.檢查端子上的螺釘是否在一定時間內接線,並確保螺釘已固定;

7.檢查電氣箱拉伸的佈線路徑中是否有鬆動的工作站;如果部件太鬆,則重新固定螺釘,以避免絕緣層磨損或損壞,從而導致漏電;

8.檢查易磨損的輕拍並按時更換損壞的輕拍;